Establishing A Connection Between Your Ipaq And The Imaging Module - Kodak AFi 10 User Manual

2. Tap Change PIN.
3. Tap in the Enter new PIN box, and then use the virtual keyboard to tap the numbers for your new
PIN.
4. Tap anywhere in the Reenter new PIN box, tap the numbers of the new PIN again, and then tap ok.
Establishing a connection between your iPAQ and the imaging
module
The first time you work with your camera system and your iPAQ, you must establish a connection between
the two devices. Thereafter, the iPAQ connects to the imaging module whenever you start the Leaf WiView
application, so long as the imaging module wireless connection is on.
You must enable wireless communication on your imaging module before you begin this task.
This task is performed on the iPAQ Pocket PC, in Setup view.

Establishing a connection between your iPAQ and the imaging module

151