Table of Contents
Advertisement
4.
Insert the lens, and rotate it clockwise firmly.
The lens locks into place, making a clicking sound.
Removing a lens
Important: If you use an extension tube, teleconverter, retro adapter, or bellows attachment with the
Leaf AFi camera system, always remove the lens and accessory together from the camera body before
releasing the lens from the accessory. Do not connect or disconnect the lens and the accessory while the
tube is attached to the camera body.
1.
Press the lens release button and rotate the lens counterclockwise.
2.
Replace the rear lens cap and the camera body cap.
Removing, rotating, and attaching the imaging module
You can remove the imaging module from the camera body when you want to rotate the imaging module,
to replace it with an analog back, or to use the imaging module on another camera.
Removing, rotating, and attaching the imaging module
65
Advertisement
Table of Contents
