Table of Contents
Advertisement
Handling your camera system
70
Removing the neck strap
When you remove the neck strap, make sure that the camera system is in a secure location where it cannot
fall.
1.
Remove the imaging module from the camera body.
2.
Remove the viewfinder from the camera body.
3.
Holding the camera body securely, push down on the neck strap lug.
4.
Maintaining pressure, pull the neck strap lug away from the camera body, and then downward rotating
the lug 90°.
The neck strap comes off the camera.
Attaching the handgrip strap
Use the handgrip strap to help you hold the Leaf AFi camera system.
Use a small, thin object such as the stylus to release the lug bolts.
The handgrip strap is attached to the camera in two places by lug bolts.
1.
Insert the end of the stylus into the lug bolt hole, push the bolt all the way in, and maintain pressure
on the stylus.
2.
While maintaining pressure on the stylus, insert the handgrip strap buckle into the slot until you hear
a click.
3.
Release the stylus.
The lug locks into place.
4.
Repeat these steps for the second buckle on the handgrip strap.
Note: Tug the handgrip strap on both sides to make sure that both lugs are secure.
Advertisement
Table of Contents
