Table of Contents
Advertisement
2.
Push the shutter release button until it reaches the halfway position and you encounter light resistance.
The camera system measures the light and stores the reading as long as you hold the shutter release
button in the halfway position.
Note: When you hold down the shutter release button, the autofocus is also locked.
Setting exposure metering activation
You can set the exposure metering to be activated automatically when you press the shutter release button,
or manually by pushing the AE button. You might want to activate the exposure meter manually under
some circumstances.
1.
Push the options button, and use the rear dial to select RE ACTIVATION.
2.
Use the front dial to select one of the following:
●
RELEASE BTN: The exposure meter is automatically activated when you push the shutter release
button halfway down.
●
MANUAL: The exposure meter is activated when you push the AE button. Select this method when
you want to use the autofocus setting while maintaining the exposure of the last shot.
The handgrip display shows the selected option.
Setting exposure metering activation
To lock the
autoexposure
independently of the
autofocus, push and
hold the AE button
immediately after
taking the light
reading. The exposure
is locked until you
release the AE button.
95
Advertisement
Table of Contents
