Microtek ArtixScan DI 5240 Start Here Manual page 6

B. On the Flatbed
1. Fold down the Document Feed Tray to
close it.
Please refer to the previous section "Close
Document Feed Tray" in this guide to
close it.
2. Raise the scanner lid (ADF).
Locate the notch at the left-front lower
side of the scanner. Then, grab on the
edge and corner of the scanner lid (ADF)
to lift it up with your two hands.
3. Place the document to be scanned face
down on the scanner glass surface.
Position the top end of the paper towards
the right of the scanner; then, lower the
scanner lid on the scanner glass surface.
WARNING: Due to the weight of the scanner lid
(ADF) at the top of the scanner, every time when
you raise or lower the scanner lid, please hold it
with your hands tightly; otherwise, the scanner lid
may fall down forcingly and then result in personal
injury and product malfunction.
6