Microtek ArtixScan DI 5240 Start Here Manual page 3

Install & Close Document Feed Tray
Install Document Feed Tray
A. Insert the Document Feed Tray by
sliding the tabs into the slots at the
back of the scanner.
B. Push the tray down until it locks in
place, and ensure that the tray sits
tightly on the scanner.
Customize the Function Button
Your scanner is equipped with one Select, one Scan/Stop and one Favorite buttons, plus a
LED display, used to automate a number of customized and predefined operations, such as
scanning to a file, sending an image to your printer, scanning for OCR, etc. Customizing
is done through the Scanner Button Settings interface in the ScanWizard DI, refer to the
scanner user's manual for more details.
LED display:
Display the selected function button
number.
Close Document Feed Tray
A. Along the tracks of the two sides of
the Document Feed Tray, slide the feed
tray UP until it
reaches the
highest
Document
Feed Tray
B. Tilt the Document Feed Tray forward in
the direction as the arrow shown in the
graph to close the tray.
• Select: Toggle through the numbers of predefined
function buttons (F1 to F5).
• Scan/Stop: Start scan immediately or cancel a
ongoing scan job.
• Favorite: Carry out the function defined to the
Favorite button directly.
3
level.