Simons Voss Technologies SmartHandle AX Advanced LockNode Quick Manual page 50

4. Fitting the LockNode (Scandinavian Oval)
1. Insert the special tool into the cover inlay on the elec-
tronics side.
15
2. Use the special tool to carefully bend the cover inlay up-
wards.
16
3. Slide the cover upwards.
17
9 Cover unlocked.
4. Remove the cover.
18
5. Use the special tool to unhook the reader module clip.
19
6. Remove the reader module.
20
21
7. Push the LockNode into its designated slot.
8
8. Place the reader module back into the module support.
23
24
50 / 108 | EN