Power Switch Assembly - HP Evo D500 Reference Manual

6.13 Power Switch Assembly

1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Disconnect the power switch/LED cable from the system board.
4. Squeeze the switch holder retaining clips together at the front of the chassis 1 and push the
switch assembly out of the chassis 2.
To install the power switch assembly, reverse the removal procedure.
✎
When installing the power switch cable it may be necessary to disconnect a data cabe from one
of the drives to make it easier to grab the free end of the cable.
Service Reference Guide, d500
Removal and Replacement Procedures— Convertible Minitower (CMT) Chassis
(Section 6.1, "Preparation for
(Section 6.5, "Computer Access
336492-005
Disassembly").
Panel").
6–25