Removal and Replacement Procedures— Convertible Minitower (CMT) Chassis
6.10 PCI Retainer Latch
If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock
"Unlocking the Smart Cover
1. Prepare the computer for disassembly
2. Remove the computer access panel
3. .Locate the correct vacant expansion socket on the system board and the corresponding
expansion slot on the back of the computer chassis.
4. Push down and out on the two green thumb tabs inside the chassis and rotate the expansion
card retention latch up.
6–14
Lock").
(Section 6.1, "Preparation for
(Section 6.5, "Computer Access
336492-005
(Section 6.2,
Disassembly").
Panel").
Service Reference Guide, d500