Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
14. If the drive cage was raised to gain access to the drive cables, lower it to its original position
at this time.
15. Replace the front bezel and computer access panel.
7.10.5 Primary Hard Drive
1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock
7.2, "Unlocking the Smart Cover
2. Prepare the computer for disassembly
3. Remove the computer access panel
4. Remove the front bezel
5. Raise the Easy Access drive bay to the upright position.
6. Disconnect the power cable and signal cable from the back of the drive.
Disconnecting Cables from the Hard Drive
7–22
Lock").
(Section 7.1, "Preparation for
(Section 7.5, "Computer Access
(Section 7.6, "Front
Bezel").
336492-005
(Section
Disassembly").
Panel").
Service Reference Guide, d500