8.18 Chassis Fan
1. Prepare the computer for disassembly
2. Remove the computer top access panel
3. Remove the hard drive
4. Remove the system fan
5. Remove the front chassis panel
6. Disconnect the power switch cable from the system board
Assembly").
7. Disconnect the front I/O cable from the system board
8. Disconnect the chassis fan power cable from the system board.
9. Press down on the black plastic mounting clip 1 while pivoting the fan assembly out of the
chassis 2
To install the chassis fan, reverse the removal procedure
Service Reference Guide
Removal and Replacement Procedures— Ultra-Slim Desktop (USDT) Chassis
(Section 8.1, "Preparation for
(Section 8.3.1, "Top Access
(Section 8.8.1, "Hard
Drive").
(Section 8.9, "System
Fan").
(Section 8.10, "Front Chassis
336492-005
Disassembly").
Panel").
Panel").
(Section 8.12, "Power Switch
(Section 8.11, "Front I/O
Device").
8–25