Indicators; Model Description - Datalogic DS2200 Reference Manual

1
A security system allows the laser to activate only once the motor has reached the
correct rotational speed; consequently, the laser beam is generated after a slight
delay from the power on of the scanner.
1.1.1

Indicators

The four LEDs on the scanner indicate the following:
POWER ON
GOOD READ
EXT TRIG
TX DATA
The screw holes on the body of the reader are for mechanical fixture (Figure A, 7).
1.2

MODEL DESCRIPTION

The DS2200 scanner is available in versions that differ in regard to the following
parameters:
•
Optical Resolution.
•
Linear or raster models.
2
(red), indicates the reader is connected to the power supply.
(Figure A, 3).
(red), is used to signal the possibility of a successful barcode
reading. (Figure A, 4).
(yellow), indicates external trigger activity. Refer to par. 2.3.4.
(Figure A, 5).
(green), when blinking, indicates data transmission. (Figure A, 6).
DS2200