1. Manuals
  2. Brands
  3. Lex Computech Manuals
  4. Computer Hardware
  5. 2I380A
  6. Manual

Lex Computech 2I380A Manual

Intel bay trail-i e3815/e3845 (single core / quad core )cpu, on board ddr3l 1066 / 1333 mt/s 2gb/4gb, lan / hdmi /audio /usb / com/ pcie mini card
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2I380A
Intel Bay Trail-I E3815/E3845
(Single Core / Quad Core )CPU, On Board DDR3L 1066 /
1333 MT/s 2GB/4GB, LAN / HDMI /Audio /USB / COM/
PCIe mini card
All-In-One
Intel Bay Trail-I E3815/E3845
(Single Core 1.46 GHz / Quad Core 1.91 GHz )CPU,
1 x Intel GbE LAN , 2 x PCIe mini card slots ,
VGA, HDMI, Audio, SATA, USB, COM
NO. 2I380A_V0.3
Release date: JAN. 15. 2015

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2I380A and is the answer not in the manual?

Questions and answers

Related Manuals for Lex Computech 2I380A

Summary of Contents for Lex Computech 2I380A

  • Page 1 2I380A Intel Bay Trail-I E3815/E3845 (Single Core / Quad Core )CPU, On Board DDR3L 1066 / 1333 MT/s 2GB/4GB, LAN / HDMI /Audio /USB / COM/ PCIe mini card All-In-One Intel Bay Trail-I E3815/E3845 (Single Core 1.46 GHz / Quad Core 1.91 GHz )CPU,...

  • Page 2: Table Of Contents

    2-1 UNPACKING PRECAUTION ..................2-2 UNPACKING CHECKUP ....................2-3 DIMENSION-2I380A ....................2-4 LAYOUT-2I380A ......................2-5 DIAGRAM-2I380A ....................... 2-5-1 BOTTOM SIDE DIAGRAM-2I380A ................2-6 LIST OF JUMPERS ...................... 2-7 JUMPER SETTING DESCRIPTION ................2-8 COMS DATA CLEAR ....................CHAPTER 3 CONNECTION ..................
  • Page 3 CHAPTER 4 INTRODUCTION OF BIOS ................ 4-1 ENTER SETUP ......................4-2 BIOS MENU SCREEN & FUNCTION KEYS ..............4-3 GENERAL HELP ......................4-4 MENU BARS ........................ 4-5 MAIN ..........................4-6 ADVANCED ........................4-6-1 BOOT CONFIGURATION ..................4-6-2 PCI EXPRESS CONFIGURATION ................4-6-2-1 PCI EXPRESS ROOT PORT 1/2/3/4 ..............
  • Page 4 Copyright This manual is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated or reproduced to any electronic or machine readable form in whole or in part without prior written consent from the manufacturer.

  • Page 5: Warning

    Warning ! 1. Battery Batteries on board are consumables. The life time of them are not guaranteed. 2. Fless solution with HDD The specifi cation & limitation of HDD should be considered carefully when the fanless solution is implemented. We will not give further notifi cation in case of changes of product information and manual.

  • Page 6: Hardware Notice Guide

    Hardware Notice Guide 1. Before linking power supply with the motherboard, please attach DC-in adapter to the motherboard fi rst. Then plug the adapter power to AC outlet. Always shut down the computer normally before you move the system unit or remove the power supply from the motherboard.
  • Page 7 Photo 1 Insert Unplug...

  • Page 8: Chapter 1 General Information

    HDMI 1080p. Besides, 2I380A has Intel LAN chipset with 10/100/1000 Mbps Ethernet for seamless broadband connectivity. With the Wake-On LAN function and the PXE function in BIOS for Intel LAN chipset, 2I380A also supports one COM port of RS232, it can option to RS422 or 485.

  • Page 9: Major Feature

    7. Hardware digital Input & Output, 4 x DI / 4 x DO (option) Hardware Watch Dog Timer, 0~255 sec programmable 8. DC +12V Input (2I380A) or option to Wide range DC input from +9V to +36V(±1V) 9. PCB Dimension: 102 x 73 mm...

  • Page 10: Specification

    PCIe Mini card for PCIe x 1 or mSATA (default) and USB interface (Half size) for PCB0.4 11. BIOS: Insyde BIOS 12. Dimension: 102 x 73 mm 13. Power: DC +12V Input (2I380A) or option to Wide range DC input from +9V to +36V(±1V) 14. Power Consumption: Please refer to Page. 84...

  • Page 11: Installing The Mini Pci-E Card

    1-3 Installing the Mini PCI-e Card 2. Install a mSATA card at the angle of 45°. 1. Unfasten the round-headed M2*6 (The half size Mini PCI-e slot supports mSATA) screw for half size Mini PCI-e. 3. Fasten a round-headed M2*6 screw.

  • Page 12: Directions For Installing The Mini Card

    1-4 Directions for installing the Mini Card 1. Unscrew the screw on the board 2. Plug in the Mini Card in a 45 angle 3. Gently push down the Mini Card and screw the screw back.

  • Page 13: Packing List

    1-5 Packing List Material Code Description Detail Specifi cation Quantit 7G1901-1272001-0 MB-2I380A-I44-00-001 LF,2I380A-I44-00,Rev.:001 6G8006-2347-0100 LEX Product Driver DVD LF, Intel Baytrail Driver 6G6003-7329-0100 Power Cable LF,L=9cm,2.0 1*2/DC JK 6G8001-2188-0400 Manual LF,M/B,2I380A 6G5212-0301-0300 30W Power Adapter,12V/2.5A LF,L Type,EA10301-M06,EDAC *The packing list above is for the users who purchase single motherboard. The users who purchase the board with chassis may refer to the packing list in the Assembly Guide.

  • Page 14: Chapter 2 Hardware Installation

    Chapter-2 Hardware Installation 2-1 Unpacking Precaution This chapter provides the information how to install the hardware of 2I380A. Please follow section 1-5, 2-1 and 2-2 to check the delivery package and unpack carefully. Please follow the jumper setting procedure. NOTE! 1.

  • Page 15: Unpacking Checkup

    2-2 Unpacking checkup First of all, please follow all necessary steps of section 2-1 to protect 2I380A from electricity discharge. With reference to section 1-5 please check the delivery package again with following steps: 1. Unpack the 2I380A board and keep all packing material, manual and driver disc etc, do not dispose ! 2.

  • Page 16: Dimension-2I380A

    2-3 Dimension-2I380A BACK 7.64 16.38 2.75 16.55 99.25 FRONT...

  • Page 17: Layout-2I380A

    2-4 Layout-2I380A CPO1 CPI1 CU12 CKM1 CU42 CU43 CIO1 (Bottom side) CFP1 JSB1 CU41 SWP11 CBT1 CU44 BAT1 MPCE2 HDMI1 MPCE1...

  • Page 18: Diagram-2I380A

    CPI1 2-5 Diagram- 2I380A CPO1 CU12 CU42 CKM1 CU43 CIO1 CFP1 JSB1 SWP11 CU41 BAT1 CBT1 CU44 MPCE2 HDMI1 MPCE1 Front Panel- 2I380A Power Bottom...

  • Page 19: Bottom Side Diagram-2I380A

    2-5-1 Bottom Side Diagram- 2I380A SATA1 BACK Panel- 2I380A HDMI...

  • Page 20: List Of Jumpers

    2-6 List of Jumpers JSB1: CMOS clear select 2-7 Jumper Setting Description A jumper is ON as a closed circuit with a plastic cap covering two pins. A jumper is OFF as an open circuit without the plastic cap. Some jumpers have three pins, labeled 1, 2, and 3.

  • Page 21: Coms Data Clear

    2-8 CMOS Data Clear A battery must be used to retain the motherboard confi guration in CMOS RAM. Close Pin1 and pin 2 of JSB1 to store the CMOS data. To clear the CMOS,follow the procedures below: 1. Turn off the system and unplug teh AC power 2.

  • Page 22: Chapter 3 Connection

    Chapter-3 Connection This chapter provides all necessary information of the peripheral's connections, switches and indicators. Always power off the board before you install the peripherals. 3-1 List of Connectors CPI1: DC 12V-IN 1x2 pin (2.0mm) Red wafer connector CPO1: +12V/+5V power output 1x4 pin (2.0mm) Black wafer connector CFP1: FP port 2x5 pin (2.0mm) Wafer(Option) SWP1: PB SW 1x2pin (2.0mm) Wafer(Option) SWP11: Power Button and Power LED (Blue)

  • Page 23: Dc Power Input

    3-2 DC power Input CPI1 : DC -in Internal connector (1x2pin 2.0mm Wafer) (Red) PIN NO. Description DC-IN(12V) Note: 1. Very important check Dc-in Voltage 2. Mating connector: JST B2B-PH-KL or compatible 3. Cable housing: JST PHR-2 or compatible 3-3 CMOS battery connector BAT1: 3V Battery hold 2pin BAT1 : Battery use Li 3V / 40mAh (CR1220) Note : 1.When board without Adaptor plug in, this board power RTC consumption 2.7uA...

  • Page 24: Dc Power Output

    3-4 DC Power output DC +12V/+5 Voltage output connector pin1 CPO1: +12V/+5V DC voltage output (4pin 2.0mm Wafer) (Black) CPO1 PIN NO. Description +12V* Note : 1. Attention! Check Device Power in spec 2. Mating connector: JST B4B-PH-KL or compatible 3.

  • Page 25: Power Button And Leds

    3-6 Power Button and LEDs SWP11: Power Button and Power LED (Blue LED) SWP11 pin1 3-7 Display interface CG1: VGA Connector (DB15 pin ) PIN NO. Description PIN NO. Description PIN NO. Description GREEN DDC DATA BLUE H-SYNC V-SYNC DDC CLOCK...

  • Page 26: Audio Interface

    HDMI1: HDMI Connector (Type A) PIN NO. Description PIN NO. Description TMDS DATA2+ TMDS DATA2- TMDS DATA1+ TMDS DATA1- TMDS DATA0+ TMDS DATA0- TMDS CLK+ TMDS CLK- DDC CLK DDC DATA H.P. Detect *Note: HDMI support 1.3a Spec HDMI1 3-8 Audio interface CA3: Line-out/Line-in/Mic-in/SPDIF-out 2x5 pin (2.0mm) Wafer PIN NO.

  • Page 27: I/O Interface

    3-9 I/O Interface COM ports CC1 : Default support RS232 Mode COM1 conector ( D-SUB 9pin) PIN NO. Description PIN NO. Description RI /Voltage Note: The pin9 RI can be modify to Power to supply device. The power voltage can be set +12V or +5V. The RI change Voltage function is OEM need change BOM.

  • Page 28: Digital Input / Output

    3-10 Digital Input / Output CIO1 DIO 0—3 (2x5pin 2.0mm wafer) PIN NO. Description PIN NO. Description DI-0 DO-3 DI-1 DO-2 DI-2 DO-1 DI-3 DO-0 Note : 1. DI pin default pull up 10KΩ to +5V 2. If use need isolate circuit to control external device 3.

  • Page 29: Io Device: F75111 Under Windows

    3-10-1 IO Device: F75111 under Windows The Sample code source you can download from Source fi le: F75111_DIOSrc.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111 Binary fi le: F75111_DemoBin.rar USERNAME & PASSWORD: sf How to use this Demo Application 1. Press the "Start" button to test DIO function 2.
  • Page 30 p.s. f75111 send "F75111_SetWDTEnable(BYTE byteTimer)" including a parameter "timer", if there's no disable signal (F75111_SetWDTDisable()) to stop it before timer countdown to 0, System will reboot. if there's disable signal received, resent Enable WDT signal, for a loop to prevent from reboot Introduction Initial Internal F75111 port address (0x9c) defi...
  • Page 31 Set output value void F75111::InterDigitalOutput(BYTE byteValue) BYTE byteData = 0; byteData = (byteData & 0x01 )? byteValue + 0x01 : byteValue; byteData = (byteData & 0x02 )? byteValue + 0x02 : byteValue; byteData = (byteData & 0x04 )? byteValue + 0x04 : byteValue; byteData = (byteData &...

  • Page 32: Io Device: F75111 Vb6 Under Windows

    Disable WatchDog void F75111_SetWDTDisable () WriteByte(F75111_INTERNAL_ADDR,WDT_CONFIGURATION,0x00); // Disable WatchDog 3-10-2 IO Device: F75111 VB6 under Windows The Sample code source you can download from Source fi le: 75111_VB_v10.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111_VB6 Binary fi le: 75111_VB_Src.rar USERNAME & PASSWORD: sf How to use this Demo Application A Function - Enable WDT timer ,Key-in the value by seconds then system will reboot after value which you key-in in left text box !! B Function - Disable WDT timer ,Push down the button then WDT timer value will be clear !!
  • Page 33 SDK Function Introduction Function EnableWDT Function EnableWDT(timer As Integer) Call WriteI2CByte(&H3, &H3) Call WriteI2CByte(&H37, timer) Call WriteI2CByte(&H36, &H73) End Function Function DisableWDT Function DisableWDT() Call WriteI2CByte(&H36, &H0) End Function Function SetDOValue Function SetDOValue(dovalue As Integer) Call WriteI2CByte(&H23, &H0) Call WriteI2CByte(&H20, &HFF) Call WriteI2CByte(&H2B, &HFF) Call WriteI2CByte(&H21, dovalue) End Function...

  • Page 34: Io Device: F75111 Under Linux

    3-10-3 IO Device: F75111 under linux The Sample code source you can download from Source fi le: F75111v2.0L.tar.gz http://tprd.info/lexwiki/index.php/IO_Device:F75111_under_linux Binary fi le: F75111v2.0LBin.tar.gz USERNAME & PASSWORD: sf How to compile source code 1. Compile source code with Code::Blocks download and install the Code::Block with command "apt-get install codeblocks" Open an exist project(F75111.cbp) in Code::Blocks, click the compile button ( add an option 'pkg-confi...
  • Page 35 1. Press the "Start" button to test DIO function 2. Press the "Enable" button to test WDT function 3. Press the "Disable" button to disable WDT 4. Check the "Enable Loop" box and press "Enable" to do WDT loop test 5.
  • Page 36 Set output value void F75111::InterDigitalOutput(BYTE byteValue) BYTE byteData = 0; byteData = (byteData & 0x01 )? byteValue + 0x01 : byteValue; byteData = (byteData & 0x02 )? byteValue + 0x02 : byteValue; byteData = (byteData & 0x04 )? byteValue + 0x04 : byteValue; byteData = (byteData &...
  • Page 37 Enable WatchDog void F75111_SetWDTEnable (BYTE byteTimer) WriteByte(F75111_INTERNAL_ADDR,WDT_TIMER_RANGE ,byteTimer); // set WatchDog range and timer WriteByte(F75111_INTERNAL_ADDR,WDT_CONFIGURATION,WDT_TIMEOUT_FLAG | WDT_ENABLE | WDT_PULSE | WDT_PSWIDTH_100MS); // Enable WatchDog, Setting WatchDog confi gure Disable WatchDog void F75111_SetWDTDisable () WriteByte(F75111_INTERNAL_ADDR,WDT_CONFIGURATION,0x00); // Disable WatchDog...

  • Page 38: Lan Interface

    3-11 LAN Interface CL1 : LAN port Giga /100Mb( RJ45 Jack) PIN NO. Description PIN NO. Description TR0-/TX+ TR2-/NC TR0-/TX- TR2+/RX- TR1-/RX+ TR3-/NC TR1+/NC TR3+/NC RJ45 LAN Connector--- LED defi ne Giga/100MB Connector Back side con RED LED GREEN LED YELLOW LED GIGA LAN 100Mb LAN...

  • Page 39: Usb Interface

    3-12 USB Interface CU12 Dual USB2.0 Port Type A PIN NO. Description PIN NO. Description P0_D- P1_D- P0_D+ P1_D+ CU1/CU2: USB2.0 port (1x4pin 1.25mm Wafer) PIN NO. CU1 (1x4pin 1.25mm) PIN NO. CU2 (1x4pin 1.25mm) P0_D- P1_D- P0_D+ P1_D+ Note : 1. CU1 / CU2 share with CU12 USB signal 2.

  • Page 40: Smbus Interface

    CU42/CU43/CU44: USB2.0 port (1x4pin 1.25mm Wafer) PIN NO. Description DATA - DATA + Note : 1. CU42 / CU43 share with MPCE1 & MPCE2 USB signal 2. Mating connector: MOLEX 53047-0610 or compatible 3. Cable housing: MOLEX 51021-0600 or compatible 3-13 SMBus Interface CU42 CU43...

  • Page 41: Sata Interface

    3-15 SATA interface SATA1: SATA port 1x7pin Connector PIN NO. Description Note: 1. SATA1 support SATA 2.0 spec update 3Gb/sec. 2. CPO1 provide SATA HDD power +12V, GND, +5V SSD use SATA port 2 channel(option) Note: 1. On board SSD for OEM option SATA1...

  • Page 42: Pci Express Mini Card

    3-16 PCI Express Mini card MPCE1/MPCE2 : Support USB and PCIe by one Interface (Mini card socket 52pin) MPCE1 : Full size mini card MPCE2 : Half size mini card PIN NO. Description PIN NO. Description +3.3V +1.5V PCIe-CLK- PCIe-CLK+ Reset PCIe-RX-/mSATA-RX+ +3.3V...

  • Page 43: Introduction Of Bios

    Chapter-4 Introduction of BIOS The BIOS is a program located in the Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gains control. The BIOS fi rst operates an auto-diagnostic test called POST (Power on Self Test) for all the necessary hardware, it detects the entire hardware devices and confi...

  • Page 44: Bios Menu Screen & Function Keys

    4-2 BIOS Menu Screen & Function Keys In the above BIOS Setup main menu of, you can see several options. We will explain these options step by step in the following pages of this chapter, but let us fi rst see a short description of the function keys you may use here: Press ←→...

  • Page 45: Menu Bars

    4-3 Getting Help Status Page Setup Menu/Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window, press <Esc>. 4-4 Menu Bars There are six menu bars on top of BIOS screen: Main...

  • Page 46: Main

    4-5 Main Main menu screen includes some basic system information. Highlight the item and then use the <+> or <-> and numerical keyboard keys to select the value you want in each item. System Date Set the Date. Please use [Tab] to switch between data elements. System Time Set the Time.

  • Page 47: Advanced

    4-6 Advanced Boot Confi guration Please refer section 4-6-1 PCI Express Confi guration Please refer section 4-6-2 USB Confi guration Please refer section 4-6-3 Video Confi guration Please refer section 4-6-4 Thermal Confi guration Please refer section 4-6-5 SATA Confi guration Please refer section 4-6-6 Console Redirection Please refer section 4-6-7...

  • Page 48: Boot Configuration

    4-6-1 Boot Confi guration Numlock Select Power-on state for Numlock, default is <ON>...

  • Page 49: Pci Express Configuration

    4-6-2 PCI Express Confi guration PCIe 1/2/3/4 confi guration settings...

  • Page 50: Pci Express Root Port 1/2/3/4

    4-6-2-1 ► PCI Express Root Port 1/2/3/4 Control the PCI Express Root Port. The optional settings are: Enabled(default), Disabled.

  • Page 51: Pcie Port 1/2/3/4 Speed

    4-6-2-2 ►PCIE Port 1/2/3/4 Speed Select PCI Express port speed. The optional settings are: Gen1(default), Gen2...

  • Page 52: Pcie Port 1/2/3/4 Option Rom

    4-6-2-3 ►PCIE Port 1/2/3/4 Option ROM Select PCIE TXE ROM support The optional settings are: Disabled(default), Enabled...

  • Page 53: Usb Configuration

    4-6-3 USB Confi guration XHCI Mode Mode of operation of xHCI controller. The optional settings are: Best Auto(default), Enabled, Disabled.

  • Page 54: Video Configuration

    4-6-4 Video Confi guration Logo & SCU Resolution 1024 x 768(Default) , 800 x 600 , 640 x480 PAVC The function is setting the display quality, The optional settings are: Disabled, LITE Mode(default), SERPENT Mode Aperture Size The optional settings are: 128MB, 256MB(default), 512MB. IGD - DVMT Pre-Allocated Use this item to select DVMT 5.0 pre-allocated (fi...

  • Page 55: Thermal Configuration

    4-6-5 Thermal Confi guration Thermal Confi guration Parameters This Value controls the temperature of the ACPI Critical Trip Point, the point in which the OS will shutdown the system. Critical Trip point is the shutdown temperature, the default value is 110˚ The CPU frequency will auto reduce when cpu temperature arrived to passive Trip point.

  • Page 56: Sata Configuration

    4-6-6 SATA Confi guration SATA Controller Use this item to Enable or Disable SATA Device. The optional settings are:: Enabled(default) or Disabled Chipset SATA Mode Determine how SATA controller(s) operate. The optional settings are: IDE Mode(default), AHCI Mode. SATA Speed Indicates the maximum speed the SATA controller can support.

  • Page 57: Console Redirection

    SATA Port 1 Connected to an ODD Use this item to Enable or Disable SATA Port1 ODD function The optional settings are:: Enabled(default) or Disable 4-6-7 Console Redirection Console Serial Redirect Use this item to enable or disable Console Redirection. The optional settings are: Enabled, Disabled(default).

  • Page 58: Acpi Table / Fetures Control

    Stop Bits The optional settings are: 1 Bit(default) , 2 Bits Flow Control The optional settings are: 1 Bit(default) , 2 Bits 4-6-8 ACPI Table/Fetures Control ACPI Table/Features Control Select ACPI sleep state the system will enter when the SUSPEND button is pressed. The optional settings: DSDT - ACPI S3 (Suspend to RAM), Enabled or Disabled(default) DSDT –...

  • Page 59: Security

    4-7 Security Supervisor Password To set up an Supervisor password 1. Select Supervisor Password. The screen then pops up an Create New Password dialog. 2. Enter your desired password that is no less than 3 characters and no more than 10 characters. 3.

  • Page 60: Power

    4-8 Power Wake on PME Determines the action taken when the system power is off and the PCI power management Enable wake up event occurs. The optional settings: Enabled, Disabled(default) Power Button Instant OFF(default) : The system will be turn off directly when push the power button. Delay 4 sec : The system will be turn off when push the power button for 4 sec.

  • Page 61: Boot

    4-9 Boot Boot type Select boot type for Dual type ,Legacy boot type or UEFI boot type, default is Dual boot type Quiet Boot The optional settings are: Enabled(default), Disabled. EFI / Legacy Device order Determine EFI device fi rst or legacy device fi rst. The optional settings: EFI device fi...

  • Page 62: Legacy

    4-9-1 Legacy Normal Boot Menu Select Normal Boot option priority or Advance Boot option priority. The optional settings: Normal(default), Advance...
  • Page 63 Boot Type Order Setting the boot type priority. The default settings is 1.USB drive 2.Hard Disk Drive 3.CD/DVD ROM drive 4.Others...

  • Page 64: Exit

    4-10 EXIT Exit Saving Changes This item allows user to reset the system after saving the changes. Save Change Without Exit This item allows user to saving the changes but doesn’t restart. Exit Discard Changes This item allows user restart the system but no saving the changes Load Optimal Default Use this item to restore the optimal default for all the setup options.

  • Page 65: Device Manager

    4-11 Device Manager Please press the key F10 when bootup to go into the Device Manager menu Serial Port 1 Confi guration Please refer section 4-11-1...

  • Page 66: Sio Fintek8180U

    4-11-1 SIO FINTEK81801U Serial Port 1 Use this item to enable or disable serial port (COM1) The optional settings are: Enabled(default), Disabled. Serial Port 1 Base IO Address / Interrupt / Serial Mode Use this item to select an optimal setting for super IO device. The optional settings are: IO=3F8h;...
  • Page 67 Power Failure This item specifi es whether your system will reboot after a power failure or interrupt occurs. [Keep state] Restores the system to the status before power failure or interrupt occurred. (default) [Always on] Leaves the computer in the power on state. [Always off] Leaves the computer in the power off state.

  • Page 68: Chapter 5 Driver Installation

    Chapter-5 DRIVER INSTALLATION There is a system installation DVD in the package. This DVD does not only include all the drivers you need but also some other free application programs and utility programs. In addition, this DVD also includes an auto detect software telling you which hardware is installed and which driver is needed so that your system can function properly.
  • Page 69 AUTOMATIC DRIVER INSTALLATION menu...
  • Page 70 1. INF Install Intel Baytrail chipset driver 2. VGA Install onboard VGA driver 3. Serial IO Install Serial IO driver (FOR Win 7 only) 4. xHCI Install Intel USB 3.0 xHCI driver (FOR Win 7 only) 5. HD Audio Install HD Audio Codec driver 6.

  • Page 71: Inf Install Intel Baytrail Chipset Driver (Example For Win8 64Bit)

    5-1 INF Install Intel Baytrail Chipset Driver (example for WIN8 64bit) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Intel® Chipset Device Software" menu" screen, click "INF". screen, click "Next". 3. At the "License Agreement" screen, 4. At the "Readme File Information" screen, click "Yes".
  • Page 72 6. Click "Finish" to restart computer 5. Click "Next" NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 64/32-bit, X:\driver\INTEL\BAY\INF\WIN7\infi nst_autol.exe For Windows 8 / 8.1 32/64-bit X:\driver\INTEL\BAY\INF\WIN_8_64\infi nst_autol.exe...

  • Page 73: Vga Install Intel Baytrail Vga Driver (Example For Win8 64Bit)

    5-2 VGA Install Intel Baytrail VGA Driver (example for WIN8 64bit) 1. At the"AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup Program menu"screen, click "VGA". screen, Click "Next". 3. At the "License Agreement" screen, 4. At the "Readme File Information" screen, Click "Yes".
  • Page 74 6. Click "Finish" to restart computer 5. At the "Setup Progress" screen, Click "Next". NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32-bit, X:\driver\INTEL\BAY\VGA\WIN_7_32\Setup.exe For Windows 7 64-bit X:\driver\INTEL\BAY\VGA\WIN_7_64\Setup.exe For Windows 8 / Windows 8.1 32-bit X:\ \driver\INTEL\BAY\VGA\WIN_8_32\Setup.exe For Windows 8 / Windows 8.1 64-bit X:\driver\INTEL\BAY\VGA\WIN_8_64\Setup.exe...

  • Page 75: Serial Io Install Driver Baytrail Serial Io Driver (For Windows 7 Only)

    5-3 Serial IO Install Driver Baytrail Serial IO Driver (FOR Windows 7 only) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup Program menu" screen, click "Serial IO". screen, Click "Next". 3. At the "License Agreement" screen, 4.
  • Page 76 5. At the "Ready to install the program" screen, 6. Click "Finish" and restart computer Click "Install" NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32-bit, X:\driver\INTEL\BAY\SERIALIO\WIN7_32Bit.msi For Windows 7 64-bit X:\driver\INTEL\BAY\SERIALIO\Win7_64Bit.msi...

  • Page 77: Xhci Install Intel Usb 3.0 Xhci Driver (For Windows 7 Only)

    5-4 xHCI Install Intel USB 3.0 xHCI Driver (FOR Windows 7 only) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup Program menu" screen, click "xHCI". screen, Click “Next”. 3. At the "License Agreement" screen, 4. At the "Readme File Information" screen, Click "Yes"...
  • Page 78 6. Click "Finish" to restart computer 5. At the "Setup Progress" screen Click "Next". NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32 / 64-bit, X:\driver\INTEL\BAY\XHCI\Driver_Installer\Setup.exe...

  • Page 79: Hd Audio Install High Definition Audio Driver (Example For Win 64Bit)

    5-5 HD Audio Install High Defi nition Audio Driver (example for WIN8 64bit) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. Click "Next". menu", click "HD Audio" 3. Click "Finish" to restart computer NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32 / 64-bit, Windows 8/8.1 32 / 64-bit X:\driver\INTEL\BAY\SOUND\Win7_Win8_Win81_R273.exe...

  • Page 80: Mbi Install Intel Mbi Driver (For Win 8/8.1 Only)

    5-6 MBI Install Intel MBI Driver (FOR Win 8/8.1 only) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup Program menu", click "HD Audio" screen, Click "Next". 3. At the "License Agreement" screen, 4. At the "Setup Progress" screen, Click "Yes".
  • Page 81 5. Click "Finish" to restart computer NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 8/8.1 32 / 64-bit, X:\driver\INTEL\BAY\MBI\Setup.exe...

  • Page 82: Txe Lnstall Intel Txe Driver

    5-7 TXE Install Intel TXE driver) 5-7-1 TXE Install for WIN8/WIN8.1 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Setup" screen, Click "Next". menu", click "TXE" 3. At the "License Agreement" screen, 4. Click "Next". Click "Yes".
  • Page 83 5. Click "Finish" & restart computer NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 8 32 / 64-bit, X:\driver\INTEL\BAY\TXE\WIN_8\SetupTXE.exe For Windows 8.1 32 / 64-bit, X:\driver\INTEL\BAY\TXE\WIN_8.1\SetupTXE.exe...

  • Page 84: Txe Install For Win7

    5-7-2 TXE Install for WIN7 Please install PXE Patch fi rst 1. At the "AUTOMATIC DRIVER INSTALLATION] 2. At the "Windows Update" screen, menu", click "TXE Patch " Click "Yes" 3. Click "Finish" & restart computer 4. At the "AUTOMATIC DRIVER INSTALLATION menu", click "TXE "...
  • Page 85 5. At the "TXE Setup" screen, Click "Next". 6. At the "License Agreement" screen, Click "Yes". 7. Click "Next". 8. Click "Finish" & restart computer NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32 / 64-bit, TXE Patch X:\driver\INTEL\BAY\TXE\WIN_7\kmdf-1.11-Win-6.1-x86.msu X:\driver\INTEL\BAY\TXE\WIN_7\kmdf-1.11-Win-6.1-x64.msu...

  • Page 86: How To Update Insyde Bios

    STEP 2. Copy utility program and latest BIOS to your bootable disc. You may download it from our website. STEP 3. (Here take 2I380A as an example, please enter your motherboard’s name) Insert your bootable disc into X: (X could be C:, A: or others.

  • Page 87: Appendix A:power Consumption Test

    Appendix A: Power Consumption Test Condition Item Spec Atom E3845 1.91 Ghz SDRAM 4GB DDR3L 1333 Operating System Windows 7 / SP1 Test Program 3D Mark 06 HDD 3.5" SATA Standard HDD HDD 2.5" SATA Slim Type HDD mSATA 32GB Test Result for reference ! Start up Operation...

  • Page 88: Appendix B:resolution List

    Appendix B: Resolution list 640 x 480 x ( 256 / 16bit / 32bit ) 800 x 600 x ( 256 / 16bit / 32bit ) 1024 x 768 x ( 256 / 16bit / 32bit ) 1152 x 864 x ( 256 / 16bit / 32bit ) 1280 x 600 x ( 256 / 16bit / 32bit ) 1280 x 720 x ( 256 / 16bit / 32bit ) 1280 x 768 x ( 256 / 16bit / 32bit )

Table of Contents