Danfoss DEVIreg Basic Installation Manual page 8

DEVIreg™ Basic
Installation steps
Description
1 . Unpack the thermostat . Make
sure all parts are delivered
(1 pc . Thermostat unit ,1 pc .
Power supply, 1 pc . Frame, and
1 pc . Wire sensor) along with
the instructions written in local
official language .
2 . Place the floor sensor in the
Flexpipe and make sure the
sensor element is properly fixed
inside a Flexpipe . The Flexpipe
must guide the sensor cable all
the way to the wall/connection
box . Our mats have this product
included . Sold separately as
(140F1114) .
Installation Guide
Illustration
9