3
Safety instruction
Make sure that the mains power supply to the thermostat is shut off
before starting the installation .
Important: When the thermostat is used to control a floor heating
element, always use a floor sensor, and never set the maximum floor
temperature to more than the manufacturer recommends for the specific
flooring type . The device is limited to 35 °C floor temperature, due to
compliance requirements . In special cases the limit can be extended
to 45 °C floor temperature after the unrecoverable breakout has been
performed . Based on the setup in the app the thermostat has maximum
temperature limitations imposed based on our recommendations .
•
Electrical heating thermostats must always be installed according to
local building regulations and wiring rules . Installation must be carried
out by an authorized and/or qualified installer .
•
The thermostat must be used in a wall mounted installation supplied
through an all-pole disconnection switch (fuse) .
•
Do not expose the thermostat/switch to moisture, water, dust, and
excessive heat .
•
This thermostat/switch can be used by children aged from 8 years
and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge, if they have been
given supervision or instruction concerning use of the appliance
6
DEVIreg™ Basic
Installation Guide
Need help?
Do you have a question about the DEVIreg Basic and is the answer not in the manual?
Questions and answers