Table of Contents
Advertisement
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
3. Select the port or LAG interface entry in the Multicast Group table.
4. Select the Interface Status from the list in the provided field in the first row.
5. Click Apply to update the device.
Address Table
Packets addressed to destinations stored in either the Static or Dynamic databases are immediately
forwarded to the port. The Dynamic MAC Address Table can be sorted by interface, VLAN, or
MAC Address. MAC addresses are dynamically learned from packets from sources that arrive at
the device as apposed to Static addresses that are configured manually.
An address becomes associated with a port by learning the port from the frame's source address
but if a frame that is addressed to a destination MAC address is not associated with a port, that
frame is flooded to all relevant VLAN ports. To prevent the bridging table from overflowing, a
dynamic MAC address, from which no traffic arrives for a set period, is erased.
The Address Table menu contains the following options:
•
"Basic"
•
"Advanced"
Basic
The Address Table Basic menu contains the following options:
•
"Address Table"
Address Table
The Basic Address Table screen displays the MAC Address table according to the defined
categories.
Configuring Switching Settings
v1.0, December 2007
4-37
Advertisement
Table of Contents
