Table of Contents
Advertisement
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
•
SNTP Server 2 – Enter the secondary SNTP server IP address
server retrieves the system time if the Primary SNTP server times out. The following
option is available:
–
Delete – Remove the currently configured SNTP Server 2.
2. Enter the SNTP Server 1 and SNTP Server 2 in the provided fields.
3. Click Apply to update the system settings.
To remove SNTP servers:
1. Check the Delete box for each SNTP server that is to be removed.
2. Click Apply to update the system settings.
Device View
The Device View menu option displays the Device View screen, which provides a graphic
representation of the device, including the port and LED statuses.
To display the Device View screen:
1. Click System > Device View. The Device View screen displays:
Figure 3-5
PoE
Power over Ethernet (PoE) provides power to devices over existing LAN cabling without updating
or modifying the network infrastructure. This removes the limitation of placing network devices
close to power sources.
3-7
v1.0, December 2007
.
The Secondary SNTP
Managing System Settings
Advertisement
Table of Contents
