Table of Contents
Advertisement
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
5. Click Apply to update the device.
Queue
The Queue screen contains fields for defining the QoS queue forwarding types.
To set the queue settings:
1. Click QoS > CoS > Basic > Queue. The Queue screen displays:
Figure 5-3
The Queue screen contains the following fields:
•
Strict Priority – Select to specify traffic scheduling based strictly on the queue priority.
•
WRR – Select to assign WRR weights to queues. The queue weights are preconfigured
and are set to 1, 2, 4 and 8.
2. Select either Strict Priority or WRR to specify the traffic scheduling method.
3. Click Apply to update the device.
Bandwidth
After packets are assigned to a queue, a scheduling scheme can be assigned to an interface, using
either:
•
Committed Burst Size – Indicates the maximum number of data bits transmitted within a
specific time interval.
•
Committed Information Rate – Indicates the rate that data is transmitted. The rate is
averaged over a minimum time increment.
The Bandwidth screen allows the user to define Ingress Rate Limit and Egress Shaping Rates.
Configuring QoS
v1.0, December 2007
5-5
Advertisement
Table of Contents
