Getting Started With Switch Management; System Requirements - NETGEAR FS728TP-100NAS Software Administration Manual

Getting Started with Switch Management

This section provides an overview of switch management, including the methods you can choose
to start managing your NETGEAR FS728TP 10/100 PoE Smart Switch with Gigabit Ports. It also
leads you through the steps necessary to get started, using the SmartWizard Discovery utility. The
section includes this information under the following menu options:
•

"System Requirements"

• "Switch Management Interface"
• "Network with a DHCP Server"
• "Network without a DHCP Server"
• "Web Access"
• "Additional Utilities"
System Requirements
The following hardware and software facilities are required to run the applications described in
this manual:
• Network facilities:
– Ethernet network with or without DHCP server as appropriate
– Ethernet cable to connect the switch to a PC
• For running the SmartWizard Discovery utility and local or remote Web Management:
– IBM-type PC with CD drive: RAM size and disk specification are not critical
– OS software: Microsoft Windows Vista, Windows XP, or Windows 2000
– Desktop computer running Microsoft Internet Explorer 5.0 or later or Netscape Navigator
6.0 or later, or equivalent
v1.0, December 2007
Chapter 1
1-1