Table of Contents
Advertisement
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
•
Source IP Address – Enter the source IP Address.
•
Source Mask – Enter the mask of the new source IP address.
•
Destination IP Address – Enter the destination IP address.
•
Destination Mask – Enter the mask of the new destination IP address.
•
Source Port – Enter the source port that is matched to packets.
•
Destination Port – Enter the destination port that is matched to packets.
•
Action – Select the action applied to packets with IP addresses that have been filtered. The
possible field values are:
–
Permit – Permit access to the device.
–
Denied – Deny access to packets originating from the blocked IP address.
–
Shutdown – Drop packets that meet the ACL criteria, and disable the port to which
the packet was addressed.
2. Select the ACL Name from the list in the provided field.
3. Select the rule entry.
4. Enter the provided fields in the first row.
5. Click Apply to update the device.
To add an IP rule:
1. Click Security > ACL > IP Rules. The IP Rules screen displays.
2. Select the ACL Name from the list in the provided field.
3. Click Add to create a new entry or duplicate an existing entry.
4. Select the added entry.
5. Enter the provided fields in the first row.
6. Click Apply to update the device.
To delete an IP rule:
1. Click Security > ACL > IP Rules. The IP Rules screen displays.
2. Select the ACL Name from the list in the provided field.
3. Select the rule entry.
4. Click Delete to remove the entry.
6-24
v1.0, December 2007
Managing Security
Advertisement
Table of Contents
