Table of Contents
Advertisement
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
6. Click CURRENT MEMBERS. The Current Members window opens and displays the
member ports included in the LAG:
Figure 4-7
LACP
Aggregated links can be set up manually or automatically established by enabling LACP on the
relevant links. Aggregated ports can be linked into link-aggregation port-groups. Each group is
comprised of ports with the same speed. The LACP screen contains fields for configuring LACP.
To configure LACP:
1. Click Switching > LAG > Advanced > LACP Configuration. The LACP Configuration
screen displays:
Figure 4-8
The LACP Configuration screen contains the following field:
•
LACP System Priority – Enter the system priority value. The field range is 1-65535. The
field default is 1.
2. Enter the LACP System Priority in the provided field.
3. Click Apply to update the device.
4-12
v1.0, December 2007
Configuring Switching Settings
Advertisement
Table of Contents
