Table of Contents
Advertisement
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
•
Event – Displays the RMON Events.
•
Log Number– Displays the log number.
•
Log Time – Displays the time when the log entry was entered.
•
Description – Displays the log entry description.
2. To refresh the RMON Events Log screen, click REFRESH.
Alarms
The RMON Alarms screen contains fields for setting network alarms. Network alarms occur when
a network problem or event, is detected. Rising and falling thresholds generate events.
To set RMON alarms:
1. Click Monitoring > RMON > Advanced > Alarms. The RMON Alarms screen displays:
Figure 7-12
The RMON Alarms screen contains the following fields:
•
Alarm Entry – Displays the alarm entry.
•
Counter Name – Enter the selected MIB variable.
•
Interface – Enter the port or LAG interface.
•
Counter Value – Displays the selected MIB variable value.
•
Sample Type – Select the sampling method for the selected variable and comparing the
value against the thresholds. The possible field values are:
–
Absolute – Compares the values directly with the thresholds at the end of the sampling
interval.
7-20
v1.0, December 2007
Monitoring the Switch
Advertisement
Table of Contents
