Replacing The Keyboard - Gateway 600YG2 Service Manual

Replacing Components in Your Gateway 600YG2

Replacing the keyboard

Tools you need to complete this task:
Screws removed during this task:
5 chrome 2.5 × 4 mm
(keyboard)
To remove the keyboard:
1
Disconnect the power cord, remove the main and optional secondary
battery, and prepare your notebook by following the instructions in
"Preparing your work space" on page 3.
2
Remove the keyboard cover by following the instructions in "Replacing
the keyboard cover" on page 24.
26
Phillips #0 screwdriver
www.gateway.com
Flat-blade screwdriver