Replacing The Keyboard Cover - Gateway 600YG2 Service Manual

Replacing Components in Your Gateway 600YG2

Replacing the keyboard cover

Tools you need to complete this task:
To replace the keyboard cover:
1
Disconnect the power cord, remove the main and optional secondary
battery, and prepare your notebook by following the instructions in
"Preparing your work space" on page 3.
2
Open your notebook.
3
Insert a flat-blade screwdriver or non-marring tool into the wide notch in
the bottom of the keyboard cover just above the SysRq key, then pry the
cover off.
Warning
24
Flat-blade screwdriver
To prevent damage to your notebook while using a
screwdriver, insert a piece of cloth between the
screwdriver, the keyboard, and your notebook case.
www.gateway.com