Replacing The Keyboard Cover - Gateway Solo 1450 Service Manual

Replacing the keyboard cover

Tools you need to complete this task:
To replace the keyboard cover:
1
Disconnect the power cord, remove the battery, and prepare your
notebook by following the instructions in "Preparing your notebook" on
page 5.
2
Open your notebook.
3
Insert a flat-blade screwdriver or non-marring tool into the small notch
in the bottom of the keyboard cover just above and between the Ins and
Del keys, then carefully pry the cover up.
Important
Flat-blade driver - OR -
To prevent damage to your notebook while using a
screwdriver, insert a piece of cloth between the
screwdriver, the keyboard, and your notebook case.
www.gateway.com
Replacing the keyboard cover
Scribe or non-marring tool
19