Gateway 600YG2 Service Manual page 34

Replacing Components in Your Gateway 600YG2
9
Rotate the keyboard away from you, then insert the four tabs located on
the front edge of the keyboard into the corresponding slots under the
palm rest. Be careful not to damage the LCD panel.
10
Carefully press the keyboard down until it is flat all the way across. The
keyboard should fall into place easily.
11
Replace the five keyboard screws. If a grounding strap that was connected
to the far-right screw, make sure to reconnect it.
12
Reassemble your notebook.
30
Tabs
www.gateway.com