Replacing Memory Under The Keyboard - Gateway M350 User Manual

Replacing memory under the keyboard

Important
Installing replacement memory under the keyboard is a process consisting of
three procedures that must be done in sequence:
1
Open the keyboard compartment.
2
Replace the memory.
3
Reattach the keyboard.
Opening the keyboard compartment
To open the keyboard compartment:
1
Follow the instructions under
page 246.
2
Turn off your notebook, disconnect the AC adapter and modem and
network cables.
3
Turn your notebook over so the bottom is facing up.
4
Remove the battery. For more information, see
page 157.
5
Turn your notebook over so the top is facing up.
6
Open the LCD panel to the normal viewing position.
Use only memory modules designed for the
Gateway M350 for upgrading your memory.
"Preventing static electricity discharge" on
www.gateway.com
Adding or replacing memory
"Replacing the battery" on
251