Replacing The Cooling Assembly - Gateway 600YG2 Service Manual

Replacing Components in Your Gateway 600YG2

Replacing the cooling assembly

Tools you need to complete this task:
Screws removed during this task:
5 chrome 2.5 × 4 mm
(keyboard)
13 chrome 2.5 × 5 mm
(bottom)
To replace the cooling assembly:
1
Disconnect the power cord, remove the main and optional secondary
battery, and prepare your notebook by following the instructions in
"Preparing your work space" on page 3.
2
If your notebook has 802.11 wireless networking built in, remove the
Mini PCI module by following the instructions in "Replacing the 802.11
Mini PCI card" on page 13.
3
Remove the keyboard cover by following the instructions in "Replacing
the keyboard cover" on page 24.
4
Remove the keyboard by following the instructions in "Replacing the
keyboard" on page 26.
44
Phillips #0 screwdriver
4 chrome 2.5 × 5 mm
(hinge covers)
4 chrome 2.5 × 5 mm
(back)
www.gateway.com
Flat-blade screwdriver
4 or 6 chrome 2.5 × 7 mm
(LCD panel hinges)
1 chrome 2.5 × 7 mm
(near touchpad)
1 chrome 2.5 × 4 mm
(near multifunction
buttons) (palm rest)