Gateway 600YG2 Service Manual page 65

To replace the system board:
1
Disconnect the power cord, remove the main and optional secondary
battery, and prepare your notebook by following the instructions in
"Preparing your work space" on page 3.
2
Remove the modular drives.
3
Remove the memory modules by following the instructions in "Adding or
replacing memory modules" on page 8.
4
If your notebook has 802.11 wireless networking built in, remove the
Mini PCI module by following the instructions in "Replacing the 802.11
Mini PCI card" on page 13.
5
Remove the hard drive kit by following the instructions in "Replacing the
hard drive kit" on page 18.
6
Remove the keyboard cover by following the instructions in "Replacing
the keyboard cover" on page 24.
7
Remove the keyboard by following the instructions in "Replacing the
keyboard" on page 26.
8
Remove the hinge covers by following the instructions in "Replacing the
hinge covers" on page 31.
9
Remove the LCD panel by following the instructions in "Replacing the
LCD panel assembly" on page 33.
10
Remove the palm rest assembly by following the instructions in "Replacing
the palm rest assembly" on page 39.
11
Remove the cooling assembly by following the instructions in "Replacing
the cooling assembly" on page 44.
12
Remove the LED indicator panel by following the instructions in
"Replacing the LED indicator panel" on page 48.
www.gateway.com
Replacing the system board
61