Garmin G1000:Piper Pilot's Manual page 93

Accessing the EIS System Display:
1) Press the ENGINE Softkey.
2) Press the SYSTEM Softkey.
3) To return to the default Engine Display, press the ENGINE or BACK Softkey.
Adjusting the fuel totalizer quantity:
From the System Display, press the DEC FUEL or INC FUEL Softkey to adjust the fuel remaining (GAL REM).
Resetting the fuel totalizer:
From the System Display, press the RST FUEL Softkey. This also resets the fuel remaining (GAL REM) to zero.
190-00692-00 Rev. B
1
2
3
4
5
6
7
8
9
10
11
12
13
Normally-aspirated
Figure 3-10 System Display (Reversionary Mode)
Garmin G1000 Pilot's Guide for Piper PA32
ENGINE INDICATION SYSTEM
Turbocharged
3-13