Table of Contents
Advertisement
HAZARD AVOIDANCE
Operating
Mode
TIS also displays non-bearing traffic, or traffic for which it is unable to determine the bearing. Non-bearing
traffic alert messages display in the center of the Traffic Map Page.
DISPLAYING TRAFFIC DATA
Traffic information can be displayed on the following pages:
• Traffic Map Page
• Navigation Map
• WPT - VOR Information Page
• PFD Inset Map
To display traffic on any page other than the Traffic Map Page, press the MAP Softkey, followed by the
TRAFFIC Softkey.
Displaying traffic on the Traffic Map Page:
1) Select the Map Page Group.
2) Press the Traffic Map Page.
3) Press the OPERATE Softkey to begin displaying traffic. 'TIS OPERATING' is displayed in the upper left corner of
the page. Alternatively, press the STANDBY Softkey to place the system in the Standby mode. 'TIS STANDBY'
displays in the upper left corner of the page.
4) Turn the Joystick clockwise to display a larger area or counter-clockwise to display a smaller area. Map ranges
are 2 nm, 6 nm, and 12 nm.
6-60
Traffic Advisory,
"Non-Bearing" Traffic (System is
Aircraft is 400'
Unable to Determine Bearing), Aircraft Distance
Below and Climbing
is 8.0 nm, 1100' Above and Descending
Figure 6-60 Traffic Map Page - Advisories
Garmin G1000 Pilot's Guide for Piper PA32
• AUX - Trip Planning Page
• Nearest Pages
• FPL - Active Flight Plan Page
Non-Threat
Traffic
Proximity
Advisory, Aircraft
is 1700' Above
and Descending
- Moving in the
Direction of the
Vector Line
Non-Threat
Traffic
190-00692-00 Rev. B
Advertisement
Table of Contents
