Table of Contents
Advertisement
NOTE: If the loaded arrival procedure has waypoints with altitude constraints retrieved from the database that
will be used as is, the altitude must be manually accepted by placing the cursor over the desired altitude, then
pressing the ENT Key. The altitude will now be displayed as light blue meaning it will now be used by the system
to determine vertical speed and deviation guidance.
12) While proceeding to OPSHN, the LPV approach to runway 35R is preferred and will be used.
a) Press the PROC Key to display the Procedures Window.
b) 'SELECT APPROACH' should be highlighted as shown in Figure 5-107.
c) Press the ENT Key. A list of available approaches for the destination airport will be displayed as in
Figure 5-108.
190-00692-00 Rev. B
Figure 5-106 Direct-to Active
Figure 5-107 Proceudures Window
Garmin G1000 Pilot's Guide for Piper PA32
GPS NAVIGATION
5-107
Advertisement
Table of Contents
