Table of Contents
Advertisement
APPENDIX A
DATABASE MESSAGE ADVISORIES (CONT.)
Message
DB MISMATCH – Obstacle database
version mismatch. Xtalk is off
DB MISMATCH – Airport Terrain
database mismatch. Xtalk is off
GMA 1347 MESSAGE ADVISORIES
Message
GMA1 FAIL – GMA1 is inoperative.
GMA1 CONFIG – GMA1 configuration
error. Config service req'd.
MANIFEST – GMA1 software
mismatch. Communication halted.
GMA1 SERVICE – GMA1 needs
service. Return unit for repair.
GIA 63W MESSAGE ADVISORIES
Message
GIA1 CONFIG – GIA1 configuration
error. Config service req'd.
GIA2 CONFIG – GIA2 configuration
error. Config service req'd.
GIA1 CONFIG – GIA1 audio config
error. Config service req'd.
GIA2 CONFIG – GIA2 audio config
error. Config service req'd.
GIA1 COOLING – GIA1 temperature
too low.
GIA2 COOLING – GIA2 temperature
too low.
GIA1 COOLING – GIA1 over
temperature.
GIA2 COOLING – GIA2 over
temperature.
A-10
Comments
The PFD and MFD have different obstacle database versions installed. Crossfill is
off. Install correct obstacle database version in both displays.
The PFD and MFD have different airport terrain databases installed. Crossfill is
off. Install correct airport terrain database in both displays.
Comments
The audio panel self-test has detected a failure. The audio panel is unavailable.
The G1000 system should be serviced.
The audio panel configuration settings do not match backup configuration
memory. The G1000 system should be serviced.
The audio panel has incorrect software installed. The G1000 system should be
serviced.
The audio panel self-test has detected a problem in the unit. Certain audio functions
may still be available, and the audio panel may still be usable. The G1000 system
should be serviced when possible.
Comments
The GIA1 and/or GIA2 configuration settings do not match backup configuration
memory. The G1000 system should be serviced.
The GIA1 and/or GIA2 have an error in the audio configuration. The G1000
system should be serviced.
The GIA1 and/or GIA2 temperature is too low to operate correctly. Allow units to
warm up to operating temperature.
The GIA1 and/or GIA2 temperature is too high. If problem persists, the G1000
system should be serviced.
Garmin G1000 Pilot's Guide for Piper PA32
190-00692-00 Rev. B
Advertisement
Table of Contents
