Table of Contents
Advertisement
OR:
1) With the User Waypoint Information Page displayed, press the NEW Softkey to activate the cursor.
2) Enter a name for the new waypoint.
3) Press the ENT Key. The message 'Are you sure you want to create the new user waypoint' is displayed.
4) With 'YES' highlighted, press the ENT Key.
5) Highlight the latitude/longitude field or the Reference Waypoints field, depending on how the waypoint is to be
defined.
6) Enter the position coordinates or the radial and distance from the reference waypoint.
7) Press the ENT Key to accept the new waypoint.
8) Press the FMS Knob to remove the flashing cursor.
Creating user waypoints from the Navigation Map Page:
1) With the Navigation Map Page displayed, press the Joystick to activate the panning function. The Map Pointer
is displayed at the present aircraft position.
2) After placing the pointer at the desired position, press the ENT Key. The User Waypoint Information Page is now
displayed with the captured position.
3) Enter a waypoint name.
4) Press the ENT Key to accept the selected name. The first reference waypoint field is highlighted.
5) If desired, enter the identifier of the reference waypoint and the radial and distance to the reference waypoint.
6) Press the ENT Key to accept.
7) Press the FMS Knob to remove the flashing cursor.
Modifying a user waypoint:
1) With the User Waypoint Information Page displayed, press the FMS Knob to activate the cursor.
2) Move the cursor to the desired user waypoint in the list at the bottom of the screen.
3) Press the ENT Key to select the desired user waypoint.
4) Use the small FMS Knob to make changes.
5) Press the ENT Key to accept the changes.
6) Press the FMS Knob to remove the flashing cursor.
190-00692-00 Rev. B
Garmin G1000 Pilot's Guide for Piper PA32
GPS NAVIGATION
5-51
Advertisement
Table of Contents
