The pilot uses the FMS Knob and the ENT Key to select an exit waypoint from the list (TOY in this
example).
After the exit waypoint is selected, the pilot gets one last chance to preview the waypoint sequence. If
necessary, the cursor can be moved back to either the Airway or Exit waypoint fields to change the selected
airway segment. Otherwise, press the ENT Key with the cursor over the LOAD prompt to load the airway
into the flight plan.
190-00692-00 Rev. B
Figure 5-76 Previewing the Waypoint Sequence
Figure 5-77 Loading the Airway into the Flight Plan
Garmin G1000 Pilot's Guide for Piper PA32
GPS NAVIGATION
5-83