Garmin G1000:Piper Pilot's Manual page 31

PFD IN REVERSIONARY MODE
In the event of a display failure, the G1000 System automatically switches to reversionary mode. The
following information indicates G1000 data that displays differently in reversionary mode. All other critical
flight data displays in the same format as in normal operating mode and is discussed in other sections of the
System Overview.
ENGINE
LEAN
SYSTEM
190-00692-00 Rev. B
Figure 1-17 Transponder Softkeys
Displays the LEAN and SYSTEM Softkeys
Displays the CYL SLCT Softkey to facilitate engine leaning
CYL SLCT The Cylinder Select Softkey cycles through selection of each
Displays the DEC FUEL, INC FUEL, and RES FUEL
DEC FUEL Decreases gallons remaining by one gallon for each press
INC FUEL Increases gallons remaining by one gallon for each press
RST FUEL Resets fuel used to zero and gallons remaining to full
Garmin G1000 Pilot's Guide for Piper PA32
DME
Press the IDENT or BACK Softkey to return
to the top-level softkeys.
cylinder indicated by changing the cylinder display to light
blue
Softkeys
SYSTEM OVERVIEW
ALERTS
ALERTS
Press the BACK Softkey to return
to the top-level softkeys.
ALERTS
1-21