Table of Contents
Advertisement
DEPARTURES, ARRIVALS, AND APPROACHES
Departure Procedure
Loaded in Active Flight Plan
DEPARTURE OPERATIONS
Loading and activating a departure procedure:
1) Press the PROC Key. The Procedures Window is displayed (Figure 5-140).
2) Highlight 'SELECT DEPARTURE'.
3) Press the ENT Key. The DEPARTURE window is displayed on the 'PROC – DEPARTURE LOADING Page.
4) Select a departure.
5) Press the ENT Key. The RUNWAY window may be displayed.
6) Select a runway.
7) Press the ENT Key. The TRANSITION window may be displayed.
8) Select a transition.
9) Press the ENT Key.
10) With 'LOAD' highlighted, press the ENT Key. The departure procedure is displayed as part of the overall flight
plan and is placed in front of the enroute flight plan.
OR:
1) With the Departure Information Page displayed (Figure 5-141), press the FMS Knob to activate the cursor.
2) Enter an identifier, facility name or city location field.
3) Press the ENT Key until the DEPARTURE window is displayed.
190-00692-00 Rev. B
Options
Arrival Loaded in Active
Flight Plan
Figure 5-140 Procedures Window
Garmin G1000 Pilot's Guide for Piper PA32
GPS NAVIGATION
Approach Procedure
Loaded in Active Flight Plan
5-131
Advertisement
Table of Contents
