show controllers cable-modem tuner
Debug Commands
The following debug commands are available to troubleshoot a Cisco uBR924 cable access router:
•
debug cable-modem bpkm
•
debug cable-modem bridge
•
debug cable-modem error
•
debug cable-modem interrupts
•
debug cable-modem mac
•
debug cable-modem map
Note
CMTS at the cable operator's headend facility; it is rarely done by directly accessing the
Cisco uBR924. For information on troubleshooting the Cisco uBR924 using Cisco uBR7200 series
universal broadband routers, see the document Cisco uBR7246 Universal Broadband Router
Features. Also see the "Related Documents" section on page 2 for additional documents relating to
troubleshooting.
58
Cisco IOS Release 12.0(5)T
Troubleshooting the Cisco uBR924 cable access router is typically accomplished using the