Cisco UBR924 - uBR 924 Router Troubleshooting Tips page 31

show controllers cable-modem filters
To display the registers in the MAC hardware that are used for filtering received frames, use the show
controllers cable-modem filters command in privileged EXEC mode.
Syntax Description
number
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Release
11.3 NA
Usage Guidelines
Some of the filtering parameters are MAC hardware addresses, Service IDs (SIDs), and upstream
channel IDs.
show controllers cable-modem number filters
Controller number inside the Cisco uBR924.
Modification
This command was first introduced.
Troubleshooting Tips for the Cisco uBR924 Cable Access Router 31
show controllers cable-modem filters