Table of Contents
Advertisement
Related Features and Technologies
Note
service operators do not permit local configuration at subscriber sites.
Caution
your network management, provisioning manager, or billing system administrator to ensure remote
configuration is allowed. If remote configuration is disabled, settings you make and save at the local site will
not remain in effect after the cable access router is reset or powered off and back on. Instead, settings will
return to the previous configuration.
Related Features and Technologies
The Cisco uBR924 cable access router is intended to be used in conjunction with a Cisco uBR7200
series universal broadband router or other DOCSIS-based CMTS located at the cable operator's
headend facility.
Related Documents
For related information on the Cisco uBR924 cable access router, refer to the following documents:
•
Cisco uBR924 Cable Access Router Quick Start Guide
•
Cisco uBR924 Cable Access Router Installation and Configuration Guide
•
Regulatory Compliance and Safety Info. for the Cisco uBR924 Cable Access Router
•
Cisco uBR7246 Installation and Configuration Guide
•
Cisco uBR7223 Installation and Configuration Guide
•
Cisco uBR7200 Series Configuration Notes
•
Cisco Network Registrar for the uBR7200 Series
•
Regulatory and Safety Compliance for the Cisco uBR7246
•
Regulatory and Safety Compliance for the Cisco uBR7223
•
Cisco uBR7200 Series Features
•
Cisco uBR7200 Series Feature Enhancements
•
Cisco uBR7200 Series Feature Enhancements in Release 12.0
•
Cisco uBR7200 Series Installation and Configuration Guide
Platforms
The Cisco uBR924 cable access router is a single-platform standalone device; it works in
conjunction with the Cisco uBR7200 series universal broadband routers.
2
Cisco IOS Release 12.0(5)T
The Cisco uBR924 cable access router is typically configured at the headend. Most cable
Before attempting to reconfigure a Cisco uBR924 cable access router at a subscriber site, contact
Advertisement
Table of Contents
