Cisco UBR924 - uBR 924 Router Troubleshooting Tips page 49

Cable access router
Table of Contents

Advertisement

COS
1:
Assigned SID:
Max Downstream Rate:
Max Upstream Rate:
Upstream Priority:
Min Upstream Rate:
Max Upstream Burst:
Privacy Enable:
Ranging Backoff Start:
Ranging Backoff End:
Data Backoff Start:
Data Backoff End:
IP Address:
Net Mask:
TFTP Server IP Address:
Time Server IP Address:
Config File Name:
Time Zone Offset:
Table 8 describes the fields shown in the display.
Table 8
Show Controllers Cable-Modem MAC State Field Descriptions
Field
MAC State
Ranging SID
Registered
Privacy Established
Mac Resets
Sync lost
Invalid Maps
Invalid UCDs
Invalid Rng Rsp
Invalid Reg Rsp
T1 Timeouts
T2 Timeouts
T3 Timeouts
T4 Timeouts
Range Aborts
DS ID
DS Frequency
5
4000000
2000000
7
100000
12
TRUE
0 (at initial ranging)
4 (at initial ranging)
0 (at initial ranging)
4 (at initial ranging)
0.0.0.0
0.0.0.0
223.255.254.254
188.188.1.5
muck/ebuell/tftp/cm_conf
-28800
Description
Current operational state of the MAC layer of the Cisco uBR924.
Service ID used for ranging requests.
Indicates whether or not the Cisco uBR924 is currently registered with the CMTS.
Indicates whether or not keys for baseline privacy have been exchanged between the
Cisco uBR924 and the CMTS, establishing privacy.
Number of times the Cisco uBR924 reset or initialized this interface.
Number of times the Cisco uBR924 lost synchronization with the downstream
channel.
Number of times the Cisco uBR924 received invalid MAP messages.
Number of times the Cisco uBR924 received invalid UCD messages.
Number of times the Cisco uBR924 received invalid ranging response messages.
Number of times the Cisco uBR924 received invalid registration response messages.
Number of timeouts caused by the Cisco uBR924 not receiving a valid upstream
channel descriptor (UCD) from the CMTS within the specified time.
Number of timeouts caused by the Cisco uBR924 not receiving a maintenance
broadcast for ranging opportunities from the CMTS within a specified time.
Number of timeouts caused by the Cisco uBR924 not receiving a response within a
specified time from the CMTS to a RNG-REQ message during initial maintenance.
Number of timeouts caused by the Cisco uBR924 not receiving a response within a
specified time from the CMTS to a periodic maintenance request.
Number of times the ranging process was aborted by the CMTS.
Identifier of the downstream channel on which this MAC management message has
been transmitted. This identifier is arbitrarily chosen by the CMTS and is only
unique within the MAC-sublayer domain.
Downstream frequency acquired by the Cisco uBR924 during its last initialization
sequence.
Troubleshooting Tips for the Cisco uBR924 Cable Access Router 49
show controllers cable-modem mac

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ubr924

Table of Contents