debug cable-modem interrupts
To debug Cisco uBR924 interrupts, use the debug cable-modem interrupts command in privileged
EXEC mode . To turn the debugging messages off, use the no form of this command.
Syntax Description
This command has no keywords or arguments.
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Release
11.3 NA
Examples
The following example shows sample debug output for Cisco uBR924 interrupts.
[no] debug cable-modem interrupts
uBR924# debug cable-modem interrupts
*** BCM3300_rx_mac_msg_interrupt ***
*** BCM3300_rx_mac_msg_interrupt ***
### BCM3300_tx_interrupt ###
*** BCM3300_rx_mac_msg_interrupt ***
### BCM3300_tx_interrupt ###
*** BCM3300_rx_mac_msg_interrupt ***
### BCM3300_tx_interrupt ###
### BCM3300_tx_interrupt ###
### BCM3300_tx_interrupt ###
### BCM3300_tx_interrupt ###
Modification
This command was first introduced.
Troubleshooting Tips for the Cisco uBR924 Cable Access Router 65
debug cable-modem interrupts