Cisco UBR924 - uBR 924 Router Troubleshooting Tips page 73

debug cable-modem map
To display the timing from MAP messages to sync messages and the timing between MAP messages
on a Cisco uBR924 cable access router, use the debug cable-modem map command in privileged
EXEC mode. To turn the debugging messages off, use the no form of this command.
Syntax Description
This command has no keywords or arguments.
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Release
11.3 NA
Examples
The following example shows display output for the debug cable-modem map privileged EXEC
command.
[no] debug cable-modem map
uBR924# debug cable-modem map
Cable Modem MAP debugging is on
uBR924#
*Mar 7 20:12:08: 595322.942: Min MAP to sync=72
*Mar 7 20:12:08: 595322.944: Max map to map time is 40
*Mar 7 20:12:08: 595322.982: Min MAP to sync=63
*Mar 7 20:12:08: 595323.110: Max map to map time is 41
*Mar 7 20:12:08: 595323.262: Min MAP to sync=59
*Mar 7 20:12:08: 595323.440: Max map to map time is 46
*Mar 7 20:12:09: 595323.872: Min MAP to sync=58
Modification
This command was first introduced.
Troubleshooting Tips for the Cisco uBR924 Cable Access Router 73
debug cable-modem map