ADA INSTRUMENTS AngleMeter 45 Operating Manual page 4

4
English
Remove cover
Insert 2xAAA batteries
Replace cover and snap in place
OPERATING INSTRUCTIONS
POWER
Press the ON/OFF button (7) for ~1 sec to turn on the display and backlight.
The angle (15) which represents the angle between the arms (3 and 5) will
be displayed in degrees (°).
The display will automatically power off after ~5 min of non-use.
The backlight will automatically power off after ~1 min of non-use. Any
button press or angle change will cause the backlight to power on if the
display is powered on.
The battery life icon (9) will appear when there is ~2 hours of battery life
remaining.
Press the ON/OFF button (7) for ~2 sec to power off the display.
INVERT DISPLAY
With the display powered on, press the ON/OFF button (7) for ~1 sec to in-
vert the display. Press again for ~1 sec to return display to normal position.
RE-CALIBRATE
If the unit is dropped or you suspect inaccuracy of the product, you can
re-calibrate the zero point. With the power on and the arms (3 and 5)
closed together, press the ON/OFF (7) and HOLD/SUP (6) buttons simulta-