Inputting Text Into An Auto Format; To Input Text Into An Auto Format Label; Specifying Character Spacing; To Turn Proportional Spacing On And Off - Casio CW-K85 User Manual

Inputting Text into an AUTO Format

The two AUTO formats automatically adjust the size of characters in accord-
ance with the number of characters you input.
The table below shows how character size is adjusted for each auto format.
Number of Input
AUTO 1 (1 line)
Characters
Displayed Size Printed Size
0 to 9 ×5 15mm (
10 to 12 ×4 12mm (
13 to 16 ×3
17 to 24
×2
25 to 49 ×1

To input text into an AUTO format label

1.
Perform steps 1 through 4 of the procedure under "To create a new label"
on page 26.
2.
On the label format selection screen, use
label formats until AUTO1 or AUTO2 is displayed.
3.
Press SET.
4.
Input the text you want.
5.
Press SET.
• Now you can perform the other steps under "To create a new label" on page
26 to complete the label.
AUTO 2 (2 lines)
Displayed Size Printed Size
5
Ú Ú Ú Ú Ú ") ×2 6mm (
8
1 Ú Ú Ú Ú Ú ") ×2 6mm (
2
3
9mm ( Ú Ú Ú Ú Ú ") ×2 6mm (
8
6mm ( 1 Ú Ú Ú Ú Ú ") 6mm (
×2
4
3mm ( 1 Ú Ú Ú Ú Ú ") ×1 3mm (
8
and to scroll through the

Specifying Character Spacing

There are two ways that characters can be spaced: proportional spacing and
uniform spacing.
With proportional spacing, the amount of space between two characters de-
pends on what those two characters are.
1
Ú Ú Ú Ú Ú ")
4
1 Ú Ú Ú Ú Ú ")
4
With uniform spacing, all characters are separated by the same amount of
1
Ú Ú Ú Ú Ú ")
4
space.
1 Ú Ú Ú Ú Ú ")
4
1 Ú Ú Ú Ú Ú ")
8

To turn proportional spacing on and off

1.
While inputting text, press FORM.
2.
Use and
3.
Use and
• Note that the setting you select is applied to all the text of the label.
4.
Press SET to apply your setting and return to the text input screen.
to select PROPORTIONAL, and then press SET.
to turn proportional spacing on or off.
31
E