Part 2 Inputting Characters And Symbols - Casio MEP-K10 User Manual

Part 2 Inputting Characters and Symbols
Important!
You can input up to 80 characters per label. Further input becomes
impossible after you input the 80th character.
Key Name
Tape length Accent
Character size Enter/Return
Character style Symbol
Text effect Backspace
Shift Setup
Esc Print (Feed)
Caps Print preview
Space Text orientation
Display Symbols and Indicators
Before getting into actual input, you should fi rst become acquainted with the
symbols and indicators used on the printer display.
Tape length indicators
(page E-13)
Character size indicators
(page E-11)
Shift indicator
(page E-9)
CAS O I
Caps indicator
C O M P U
(page E-9)
Accent indicator
(page E-10)
Basic Alpha-Numeric Input
Note
If you hold down any key, it will repeat its operation or input at high speed
until you release it.
To input alpha-numeric characters
1. Turn on the printer (page E-6).
2. Input the fi rst line of characters.
To input upper-case letters, you can use either
shift the keyboard for each character. With
until you press again.
If you input a wrong character, press
page E-10 for other details on editing text.
3. When you reach the end of a line of text, press
mark.
A newline operation is indicated on the display by the
shows where you changed lines.
The maximum number of lines that can be input is one line when the tape
width is 9 mm, two lines when the width is 12 mm, and three lines when the
width is 18 mm.
4. Input the characters in the second line.
5. To print the text that you input, press
Style indicators
(page E-11)
Effect indicators
(page E-11)
Tape width
indicators
(page E-6)
T ER
• • • • • • • •
Vertical text
indicator
Cursor
(page E-13)
Character position marks
or . With
the keyboard stays shifted
to delete it and input again. See
to input a newline
symbol. This
. For details on printing, see page E-12.
you must
E-9