Disc Label Data; Disc Printing Terms; Creating Disc Label Data - Casio CW-K85 User Manual

DISC Label Data

Disc Printing Terms

The following defines a few disc printing terms that are used in this part of the
manual.
Print Surface
This is the side of the disc that the printer will print on. Some discs may have
manufacturer logos or other information pre-printed on this side.
Print Data
This is the text, illustrations,and all other items that the printer will print onto
the print surface of the disc.
Print surface
Print Areas
These are the areas on the disc where the printer prints. The printer can print
in two print areas: an upper print area and a lower printer area.
Upper print area
(AREA A)
Lower print area
(AREA B)
Width: 74mm (2 15/16")
SPEECH Print data
CONTEST
Height: 16mm (5/8")

Creating Disc Label Data

The following are the general steps when preparing data for disc labeling.
After inputting the required data, you can then use it to print directly onto the
disc.
Getting Ready
• Connect the AC adaptor or load batteries (page 9).
• Load an ink ribbon cassette (page 15).
General Flow for Creating a Disc Label
1.
To create a new label
To edit an existing
from scratch, select
label, select
NEW on the initial
STORED DATA
screen (page 26).
(page 44).
2.
Select the print pattern
you want to use (page
26).
3.
Select the format you
want to use (page 27).
4.
Input the text you want (page 33).
5.
Select the text attributes you want.
Specify the font (page 41), select the style (page 42), and specify
the text alignment (page 31).
Print the label (page 21) and store it in memory (page 44), if you want.
To edit the label
data you were
working on the last
time you were
using the printer,
select LAST DATA
(page 14).
25
E