Using Batteries - Casio CW-K85 User Manual

2.
Connect the AC adaptor plug to the printer's AC adaptor terminal (1), and
then plug the power cord into a household power outlet (2).
1
To disconnect the AC adaptor
Important!
• Never disconnect the AC adaptor while a printing operation is in progress.
Doing so creates the risk of printer malfunction.
• Never disconnect the AC adaptor or remove the batteries while the printer is
turned on. Also, make sure that the display is completely blank after turning
off the printer before disconnecting the AC adaptor or removing the batteries.
Disconnecting the AC adaptor or removing the batteries at the wrong time
can cause loss of text you are working on, as well as data you have stored
in printer memory.
1.
Unplug the power cord from the wall outlet (1), and then unplug the AC
adaptor from the printer (2).
2
10
E
• Take care that you do not excessively bend
or twist, or pull on either end of the power
cord (points marked A and B in the
illustration). Take care that the power cord is
not bent excessively at these points when
storing the cord. Any of the conditions
2
mentioned above can cause breaks in the
wiring of the cord.

Using Batteries

Note
• The printer can run on eight AA-size alkaline batteries. Be sure to use alkaline
batteries only.
1.
1
2.
Turn over the printer and remove the bat-
tery cover.
• Never bend or twist the battery cover,
or otherwise subject it to rough
handling. Doing so creates the risk of
printer malfunction.
Load a set of eight new batteries.
• Make sure the positive g and negative
h poles of the batteries are facing in
the proper directions.
B
A