Mounting (for Customer)
Contact your supplier as they may be able to provide a list of qualified installation professionals. Mounting the product on a wall
or ceiling and hiring a technician are the customer's responsibility.
Maintenance
• Periodically check for loose screws, gaps, distortions, or other problems that may occur with the mounting equipment. If a
problem is detected, refer to a qualified personnel or the supplier for service.
• Depending on the environment, the mounting location may weaken due to natural degradation. Regularly ask a qualified
personnel to inspect the mounting location and carry out maintenance.
Changing the Logo Ornament Position
When using the monitor in the portrait position, the logo ornament position can be changed.
Removing the logo ornamentE: Unscrew the installed screw then take off the logo ornament.
Attaching the logo ornamentE: Make sure the holes for the screws on the logo ornament and the holes for the
screws on the bezel are aligned. Reattach the logo ornament with the same screws that were removed when taking
the logo ornament off the product for repositioning. (Recommended Fasten Force: 30-40 N•cm).
Do not use any other screw to install the logo ornament.
NOTEE::
Screw hole
Screw
English - 14