Danfoss BOCK HA44e Operating Manual page 38

13 | Declaration of incorporation
Declaration of incorporation of partly completed machinery in accordance with
UK Statutory Instrument Supply of Machinery (Safety) Regulations 2008, Annex II 1. B
Manufacturer:
We, as manufacturer, declare in sole responsibility that the partly completed machinery
Name:
Types:
Name:
Types:
D
GB
Serial number:
F
complies with the following provisions of the above-mentioned Statutory instrument:
E
Designated standards: EN ISO 12100 :2010
Remarks:
Authorized representative for compiling and handing
over technical documentation:
Frickenhausen, 14th of October 2022
38 | AQ452839384735en-000301
Bock GmbH
Benzstraße 7
72636 Frickenhausen, Germany
Semi-hermetic compressor
HG(X)12P/60-4 S (HC) ........................ HG(X)88e/3235-4(S) (HC)
UL-HGX12P/60 S 0,7........................... UL-HGX66e/2070 S 60
HGX12P/60 S 0,7 LG .......................... HGX88e/3235 (ML/S) 95 LG
HG(X)22(P)(e)/125-4 A ........................ HG(X)34(P)(e)/380-4 (S) A
HGX34(P)(e)/255-2 (A) ....................... HGX34(P)(e)/380-2 (A)(K)
HA(X)22e/125-4 ................................... HA(X)6/1410-4
HAX22e/125 LT 2 LG ......................... HAX44e/665 LT 14 LG
HGX12e/20-4 (ML/S) CO
UL-HGX12e/20 (S/ML) 0,7 CO
HGX12/20-4 (ML/S/SH) CO
UL-HGX12/20 ML(P) 2 CO
HGZ(X)7/1620-4 .................................. HGZ(X)7/2110-4
HGZ(X)66e/1340 LT 22........................ HGZ(X)66e/2070 LT 35
HRX40-2 CO T H................................ HR(Z)X60-2 CO
2
Open type compressor
F(X)2 ................................................... F(X)88/3235 (NH3)
FK(X)1.................................................. FK(X)3
FK(X)20/120 (K/N/TK).......................... FK(X)50/980 (K/N/TK)
BC00000A001 – BN99999Z999
According to Schedule 2, part1, points 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.7, 1.5.1, 1.5.2,
1.5.13 and 1.7.1 to 1.7.4 (excepted 1.7.4 f) are fulfilled.
EN 12693 :2008
We also declare that the special technical documentation for this partly completed machine
has been created in accordance with Annex II, 1. B and we obligate to provide these upon
reasoned request from the individual national authorities by data transfer.
Commissioning is prohibited until it has been confirmed that the machinery into which the
partly completed machine above is to be incorporated complies with the UK Statutory
Instrument Supply machinery (Safety) regulations 2008 and an EC Declaration of Conformity,
Annex II, 1. A exists.
(LT) ........... HGX44e/565-4 S CO
2
(LT)... UL-HGX44e/565 S 31 CO
2
T.............. HGX46/440-4 (ML/S/SH) CO
2
T............... UL-HGX46/440 ML(P) 53 CO
2
Safety of machinery — General principles for design — Risk
assessment and risk reduction
Refrigerating systems and heat pumps — Safety and environmental
requirements — Positive displacement refrigerant compressors
UKCA Experts Ltd.
Dept 302, 43 Owston Road
Carcroft, Doncaster, DN6 8DA,
United Kingdom
i. A. Alexander Layh, Global Head of R&D
2
2
T
2
T
2
T (H)(V)
2
© Danfoss | Climate Solutions | 2024.03